RANGE OF ABUTMENTS CDI standard design and universal design abutments are suitable for all your applications, including single or multiple units and cement-on or cross pin techniques. All abutments feature a 2° taper as standard. The taper can be adjusted up to 5°, depending on fixture placement and individual design requirements. You can choose from two collar types:      > chamfer collar - standard design      > shoulder collar - universal design. Collars of varying height and angles are available to suit your specific needs. /1/ Standard design abutment 0.5 < 6.0mm collar / 2/ Universal design abutment 0.5 < 6.0mm collar CDI MULTI-PURPOSE ANGULATED ABUTMENTS CDI angulated abutments are available in varying degrees of angulation, with a standard 5° taper, and can be used for both cement-on and cross pinning techniques. They can solve any conceivable angulation problems. These multi-purpose angulated abutments are fabricated according to the design set in play by the Position Replicator®, providing you with abutments that require minimal modifications before you build the implant. * Please note: we can also custom-make 12 position angulated abutments for all external hex systems. /3/ Multi-purpose kneeless angulated abutment 15° ideal for single unit restorations, specifically for cases with shallow fixture placements and maximum aesthetic requirements /4/ Multi-purpose abutment with chamfer 0.5 < 6.0mm collar /5/ Multi-purpose angulated abutment with shoulder collar 0.5 < 6.0mm collar CDI MILLING CYLINDERS CDI milling cylinders have an ideal thickness for individual milled abutment designs. /6/ Milling cylinder 12.0 x 8.0mm CDI CASTABLE ABUTMENTS CDI castable machined abutments allow you to cast single multi-unit abutments, in any type of alloy, for each individual case. /7/ Castable abutment CDI DIRECT TO FIXTURE ABUTMENTS CDI’s direct to fixture (DTF) abutments are non-engaging. They are ideal to use in large cases with multiple or divergent fixtures, as the path of insertion is not as critical as it is with engaging abutments. DTFs are used in conjunction with laser welding and Ti casting technology to produce strong, lightweight (yet robust) frameworks for:      >processing acrylic resin      >manufacture of milled sub-frames      >overdenture bars and frameworks(< 2 fixtures)      >porcelain application where suitable(utilising titanium-specific porcelains). /8/ DTF non-engaging abutment DTFs are specifically designed for laser welding, as they have a wall thickness that is suitable for the laser welding technique. DTFs can be made to any height or fixture size you require. CDI INTERIM ABUTMENTS CDI interim abutments are specifically designed for the manufacture of single-unit temporary crowns, for either the surgery or the laboratory. They are engaging abutments with a ridged body, allowing for retention of the light-curing composites or self-curing resins. /9/ CDI interim abutment CDI HEALING ABUTMENTS Custom-made healing abutments are available for your standard and non-standard requirements. /10/ CDI standard healing abutment 5.0mm height /11/ CDI standard healing abutment 4.0mm height /12/ CDI standard healing abutment 3.0mm height /13/ CDI standard healing abutment 2.0mm height CDI CUSTOMISED HEALING ABUTMENTS Customised healing abutments can be designed to your specifications. /14/ Conical design /15/ Tapered design /16/ Standard design /17/ Straight design CDI ABUTMENT SCREWS All CDI abutments come with abutment screws and are manufactured to meet the highest standards of strength and precision, with a torque guide of up to 35 Ncm. /18/ Abutment screws CDI CROSS PINS CDI cross pins are an ideal solution for all single or multi-unit abutments that require horizontal screw retained restorations. Available in three sizes, they allow you to recreate an ideal contour. /19/ Cross pin - short /20/ Cross pin - regular /21/ Cross pin - long CDI ANALOGUES CDI analogues, manufactured to meet the highest standards of strength and precision, will suit most of your implant systems. /22/ CDI analogue